Ready to tackle any high-performance computing, embedded IoT, or industrial application, the SanDisk X600 SATA SSD is built on 64-layer 3D NAND technology and offers high capacity and enhanced reliability at blazing speeds.
Optimized for a variety of computing applications like gaming, HD media playback, or creative software, the SanDisk X600’s 3D NAND technology helps enable sequential read speeds up to 560MB/s and sequential write speeds up to 530MB/s for fast system boot-ups, quick application responses, and rapid transfer speeds.3
The SanDisk X600 3D NAND SATA SSD uses Western Digital 3D NAND technology not only for higher capacities (up to 2TB1) than the previous generation of SanDisk X400 SSDs, but also to help reduce cell-to-cell interference for enhanced reliability. With 1.75M hours MTTF (mean time to failure),4 up to 500 TBW (terabytes written), 5 and several error correction technologies, SanDisk X600 3D NAND SATA SSDs can help guard data for years to come.
|Sequential Read/Write3||Up to 560/530MB/s||Up to 560/530MB/s||Up to 560/530MB/s||Up to 550/525MB/s||Up to 530/490MB/s|
|Random Read/Write||Up to 95k/84k IOPS||Up to 95k/84k IOPS||Up to 95k/84k IOPS||Up to 95k/81k IOPS||Up to 82k/74k IOPS|
|Form Factor||2.5"/7mm cased, M.2 2280||2.5"/7mm cased, M.2 2280||2.5"/7mm cased, M.2 2280||2.5"/7mm cased, M.2 2280||2.5"/7mm cased, M.2 2280|
|Interface||SATA III (6 Gb/s) backward compatible to SATA II and I||SATA III (6 Gb/s) backward compatible to SATA II and I||SATA III (6 Gb/s) backward compatible to SATA II and I||SATA III (6 Gb/s) backward compatible to SATA II and I||SATA III (6 Gb/s) backward compatible to SATA II and I|
|Endurance5||500 TBW||400 TBW||200 TBW||100 TBW||72 TBW|
|Get the X600 SSD Data Sheet Talk to an Expert about the x600|
1. As used for storage capacity, one terabyte (TB) = one trillion bytes. Total accessible capacity varies depending on operating environment.
2. Active power draws are up to 25% lower during sequential reads than previous generations of SanDisk X400 SSD at the 512GB capacity point.
3. As used for transfer rate or interface, megabyte per second (MB/s) = one million bytes per second and gigabit per second (Gb/s) = one billion bits per second.
4. MTTF = Mean Time To Failure based on internal testing using Telcordia stress part testing.
5. TBW (terabytes written) values calculated using JEDEC client workload (JESD219) and vary by product capacity.
6. imensions and weight vary based on form factor and capacity.